Savetix® captive screws

Applications of Savetix® washers and Savetix® screws

Product used Application Characteristics Advantage
Savetix®-Scheibe und Savetix®-Schraube im Set
Savetix® washer and Savetix® screw as a set		 After fitting, the Savetix® washer is held by the thinner part of the screw shaft, but is fully movable. Since the screw has considerable freedom of movement, this version is recommended where a machine requires frequent maintenance.
  • Maximum security
  • Maximum convenience
  • Fully complies with the EU Directive
Selbstklebende Savetix®-Scheibe und Savetix®-Schraube im Klebe Set
Self adhesive Savetix® washer and Savetix® screw as a self-adhesive set		 As above, but with self-adhesive washers. As above. 3, but this set simplifies simultaneous fitting of many screws. Improves convenience and safety during installation.
  • Maximum security
  • Maximum convenience
  • Maximum time-saving
  • Fully complies with the EU Directive

Savetix® Adhesive

Description This glue is a modified, solvent-free acrylate adhesive. It has excellent tack and instantly adheres well to most surfaces including such difficult surfaces as foam and PE or PP film. The glue is free of APEOs.
Technical data Backing material Nonwoven fabric 12 g/m2
Cover Release paper, yellow, 90 g/m2
Glue application weight 90 g/m2
Total thickness 0.10 mm
Adhesive strength min. 16 N / 25 mm2 (contact time: 1 hr)
Temperature resistance from – 40°C to +100°C

Savetix® captive washers

Savetix® captive washers - standard tolerances to DIN 6930
Size
(nominal size)		 Diameter of hole d1
min.		 Outer diameter D2
 Thickness s
(nominal size)		 Height b
max.		 Contact area c
min.		 Material
M4 4.1 19.5 0.4 and 0.6 3.8 2.7 A2 - 1.4301
M5 5.1 20.5 0.5 and 1.0 4 2.7
M6 6.1 21.5 0.6 and 0.8 and 1.0 4.2 2.7
M8 8.1 25 0.8 and 1.0 and 1.5 5.4 2.7
M10 10.1 27.5 1.0 and 1.5 5.8 2,7
M12 12.1 29.5 1.2 and 1.8 6.5 2.7

Standard tolerances to to DIN 6930
Savetix® washers is also available in special, customer specific sizes.

Savetix® captive hex screws with a thin shank, hex head to DIN 933 - technical specifications

Savetix® captive hex screw with a thin shaft, hex head in accordance with DIN 933
Size (nominal size)
d		 Spanner size
s		 Head height
k		 Length
l		 Threaded length
b1		 Material
M4 7 2.8 The following lengths are available:
6, 8, 10, 12, 14, 16, 20, 25, 30, 35, 40, 45 mm
(length depends on size)		 To customer specification
min. 4 mm		 A2 - 1.4301
M5 8 3.5
M6 10 4.0
M8 13 5.3
M10 17 6.4
M12 19 7.5

Savetix® captive cap screw with thin shank, head to DIN 912 - technical specifications

Savetix® captive cheese head screw with a thin shaft, head in accordance with DIN 912
Size (nominal size)
d		 Spanner size
s		 dk Head height
k		 Length
l		 Threaded length
b1		 Material
M4 3 7 4 The following lengths are available:
6, 8, 10, 12, 14, 16, 20, 25, 30, 35, 40, 45 mm
(length depends on size)		 To customer specification
min. 4 mm		 A2 - 1.4301
M5 4 8.5 5
M6 5 10 6
M8 6 13 8
M10 8 16 10
M12 10 18 12

Also available in other screw geometries.